Intelligent PDUs

Control up to 96 power outputs from one remote network port

When it comes to power management, control and monitoring are two of the most important issues facing systems administrators today. With many installations spread over different locations, the need for a simple, centralised control solution that can manage every aspect of performance, from controlling individual outputs to monitoring alerts has never been greater.

Our intelligent PDUs are available in Master and Slave configurations. Master units come with an embedded web server that enables continuous remote control and monitoring. They can be daisy-chained to Slave units to provide up to 96 outputs via a single IP connection.

Intelligent, expandable distribution – Our Master PDUs have an embedded web server for complete control

Our intuitive web interface provides quick and easy access to control and configuration facilities. Monitor the health of racks, see the status of every output and receive email alerts if pre-set limits are exceeded.

System status

System status
At-a-glance system status. Monitor every output on every connected PDU. All PDUs are continuously polled for status. Configure individual PDUs and outputs. On ACO units, each input is monitored and the active input clearly displayed.

Network settings

Network settings
Configure network interfaces including IP address, subnet mask, gateway and API port numbers. Set SMTP server and email addresses so that your systems admin can receive pre-set email alerts.

PDU Settings

PDU Settings
Set master parameters for the PDU such as name, start-up sequences, enabling email alerts and temperature ranges. Send email alerts on the detection of a UPS GPI (on and off), fuse failure (and restore), and critical temperatures.

Output settings

Output settings
Configure settings for each output such as name, load shedding, status and cycling. Shed load when UPS active, restore when GPI is removed. Control ACO inputs. Power up from the browser. Switch outputs on and off manually or set to cycle.

Energy management made easy

Extendable rack-mount solutions that provide continuos real-time information about your system, while delivering a reliable power supply or instantaneous switching between primary and secondary power supplies. Designed for critical applications.

eMU-2M

eMU-2M

Twelve individual power outputs and an embedded web server, enabling remote control and monitoring facilities via LAN/WAN or the internet. Continuous real-time system information and a reliable power supply, providing control of up to 96 outputs from a single network port.

Key features

  • 20A Powercon input
  • 16A input fuse
  • 12 individually fused IEC outputs (6A)
  • Sequential power on
  • Power shedding
  • Embedded web server and LAN control
  • SNMP control, monitoring and alerts
  • External temperature sensors

eMU-2S

eMU-2S

A twelve output slave unit that connects to the eMU-2M, enabling the same remote control and monitoring facilities via its embedded web server. Up to seven slaves can be daisy-chained via RS485 serial data link to any master unit, providing significant savings in your control room.

Key features

  • 20A Powercon input
  • 16A input fuse
  • 12 individually fused IEC outputs (6A)
  • Sequential power on
  • Power shedding
  • LAN control via eMU-2M
  • External temperature sensors

eMU-ACO-2M

eMU-ACO-2M

Ten power outputs, dual inputs with automatic, local or remote changeover and an embedded web server enabling remote control and monitoring facilities. Continuous protection and system information, providing instantaneous switching and control of multiple outputs from one network port.

Key features

  • 2x 20A Powercon input
  • 16A input fuse
  • 10 individually fused IEC outputs (6A)
  • Auto or manual changeover
  • Sequential power on
  • Power shedding
  • Embedded web server and LAN control
  • SNMP control, monitoring and alerts
  • External temperature sensors

eMU-ACO-2S

eMU-ACO-2S

A ten output slave unit with dual inputs and auto changeover that connects to the eMU-ACO-2M, and can be controlled and monitored using its web server. Up to seven slaves can be daisy-chained via RS485 serial data link to any master unit, providing significant savings in your operational costs.

Key features

  • 2x 20A Powercon input
  • 16A input fuse
  • 10 individually fused IEC outputs (6A)
  • Auto or manual changeover
  • Sequential power on
  • Power shedding
  • LAN control via eMU-ACO-2M
  • External temperature sensors


pdf download icon Download the PDU Brochure